Skip to content
Free gate installer referrals across Adelaidehello@automaticgatesadelaide.com.au

Gate Automation and Gate Motors in Adelaide

Already have a gate you’d like to automate, or an old opener that’s had its day? Tell us about it and we’ll pass your enquiry to a local gate installer for a free, no-obligation quote.

Get a free quote

Find a gate automation installer in Adelaide

If you’re still getting out of the car to open the gate, automating it may be simpler than you think. A gate installer can fit a motor to most existing sliding and swing gates, or replace a tired old opener with a current model. Tell us about your gate and we’ll connect you with a local gate installer who does gate automation.

Automatic Gates Adelaide is a free referral service. We don’t install gates or motors ourselves: the gate installer quotes, contracts and does the work, and you deal with them directly.

Automation work we can help with

  • Adding a motor to an existing sliding or swing gate
  • Replacing old, noisy or unsupported gate motors
  • Battery backup and solar gate kits
  • Remotes, keypads, card and tag readers
  • Intercoms, video intercoms and phone app control
  • Safety beams, electric locks and pedestrian gate locks
  • Automation for strata, rural and commercial gates

How gate automation works

An automatic gate has a motor (or two, for double swing gates) that moves the gate, a controller that tells the motor when to start and stop, and safety devices that stop the gate if something is in the way. Remotes, keypads and intercoms send the signal to open. Our guide to how automatic gates work explains each part.

Who does what

Part of the job Who usually does it
Checking the gate, posts, hinges, wheels and track Gate installer
Mounting the motor, gear rack or arms Gate installer
Low-voltage wiring to motors, safety beams, keypads and intercoms Gate installer
New power point at the gate, hard-wiring to mains, new circuits Licensed electrician
Trenching and conduit for cables Gate installer, electrician or a landscaper, depending on the quote

In South Australia, work on mains (230V) electrical installations must be done by a licensed electrician, who should give you a Certificate of Compliance when they finish. Many gate installers work with an electrician and include them in the quote, but check.

What to ask before you sign

  • Does my gate need any repairs or reinforcing before it’s automated?
  • Which motor is included, what is its warranty, and are parts easy to get?
  • Is battery backup included? How many cycles will it run in a blackout?
  • Are safety beams and obstruction detection included and tested at handover?
  • How many remotes are included, and what do extra remotes cost?
  • Does the price include a licensed electrician, trenching and conduit?
  • Will they show me how to use the manual release?

Wondering about running costs? Read are electric gates expensive to run and are automatic gates worth it.

How it works

A quote from a local gate installer, without ringing around

  1. Tell us about your project

    Fill in the short form with your suburb and what you need: a new sliding or swing gate, a motor for an existing gate, an intercom or a repair.

  2. We refer a local gate installer

    We pass your enquiry to a local gate installer who does that kind of work in your part of Adelaide.

  3. The gate installer contacts you

    They get in touch to talk through the job, arrange a site visit if it’s needed and give you a quote.

  4. You decide

    There’s no obligation. Compare the quote, check the gate installer’s licence and only go ahead if you’re happy with the price, design and timing.

Get a free quote
Before you hire

How to choose a gate installer in Adelaide

Choose a gate installer who holds a current South Australian building work contractor licence and public liability insurance, gives you a written, itemised quote, and tells you who will do the electrical work and lodge any council approval.

Check these for yourself before you sign: we don’t vouch for any installer’s licence, insurance or work, and licences and insurance can lapse. The statutory warranties under the Building Work Contractors Act 1995 (SA) come from the gate installer who does the work, not from us.

Get a free quote

Checks before you sign

  1. Check the gate installer’s building work contractor licence on the Consumer and Business Services (CBS) website.
  2. Ask for a current certificate of currency for their public liability insurance.
  3. Get a written quote listing the materials, sizes, inclusions, exclusions and GST.
  4. Ask whether the quote includes a licensed electrician for the power supply, plus trenching and conduit. Mains electrical work must be done by a licensed electrician, who should give you a Certificate of Compliance.
  5. Check that safety beams and obstruction detection are included and will be tested at handover.
  6. For new gates and fencing on the front boundary, ask whether you need development approval and who will lodge it through PlanSA.
  7. Ask about the motor warranty, parts availability and how the manual release works.
  8. For domestic building work of $20,000 or more that needs development approval, the builder must take out building indemnity insurance and give you the certificate before work starts.

Gate Automation & Motors: common questions

Can any gate be automated?

Most sliding and swing gates can, as long as they move freely, are strong enough to take a motor, and the posts, hinges, wheels or track are in good condition. A gate that drags, sags or is very heavy may need repairs or reinforcing first. The gate installer will check this on site.

Should I choose a 24V or 230V gate motor?

Many residential motors run on 24V DC from a transformer. They tend to be smoother, can run soft-start and soft-stop, and often take a backup battery. Some heavy-duty motors run directly on 230V. Either way the motor needs mains power at the gate, installed by a licensed electrician. Ask the gate installer why they’ve chosen the motor in the quote.

Can I just replace my old gate motor?

Often, yes. If parts are no longer available for an old motor, replacing it with a current model may be cheaper than chasing parts. The new motor has to suit the gate’s weight and width, and the existing wiring and safety beams should be checked at the same time.

Is a solar gate opener worth it?

Solar kits avoid running mains power to the gate, which can save on trenching. They suit gates with good sun and light use. Heavy gates, frequent use, intercoms and lighting are usually better on mains power, sometimes with a battery backup.

Can I install a gate opener myself?

Some kits are sold for DIY, but mains wiring isn’t a DIY job in South Australia: power points and hard-wired connections must be done by a licensed electrician. Setting up safety beams and obstruction detection correctly also matters. Our guide to installing an automatic gate opener explains what’s involved.

Ready to find a gate installer?

Tell us about your project and we’ll connect you with a local gate installer for a free, no-obligation quote.